The Spin Master Pro series offers over the previous Spin Master Series Advanced programming features such as "Auto-timing 'and the direct input of Abschalte-/Abregelspannung to meet all Anforferungen and battery types.
Moreover, in addition from MasterSPIN Pro 44 is a transfer of real telemetry functions via the Jeti Duplex system possible (engine speed, battery voltage, motor controller temperature, fault diagnosis). Note: no duplex EX telemetry, ie display of these values ​​"only" in the Jeti-mode DC / DS -16 and the JetiBox professional
When the master spin-Pro controller is brushless speed controller the company Jeti / Hacker.
The so-called multi-mode allows switching between different helicopter and Flugzeugmodi. The Spin Master Pro controllers allow a smooth, optimized motor start-up, a very accurate speed control over the entire speed range and also have a high overload capacity. A phased programming in small steps, such as 1 degree, 1 degree Celsius, 1/100 second, 0.1 volts, ... distinguishes these controls from the rest.
To work with virtually any arbitrary brushless outer or inner rotor is possible. An automatic engine shutdown or speed regulation can be phased out by the pilot (for temperature, voltage, current, ...). The integrated protection program allows operation of all possible types of batteries because the controller can be set precisely in 0.1 volt increments.
A variety of settings are possible: rotation, work mode, regulate development, regulatory size, seating, timing, acceleration, frequency, brake, turn-off voltage, shutdown, ...
The speed control mode has a linear or non-linear gradient control. The Spin Master Pro controllers offer the possibility to reset the model types in the factory setup.
The Hacker Master Spin Pro controller to work with a variable clock circuit. All these settings can be carried out with the Jeti Box.
